This product is for parts with a risk of damage to A-CLASS thermal insulation.
It does not need outer protection using galvanized iron and has affordability and good quality (surface hardness and resilience).
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Passage way (Height Below 2300mm, A-60) except Vent Trunk (PCTC, A-30/A-60), and Elevator Trunk | Density | 150kg/㎥ (40mm, 60mm) |
| Reference | IMO Res. MSC. 307(88):2010 / ANNEX 1 Part 3 : A Class Division, Part 5 : Surface Flammability | Fitting | YS-HARDNESS |
| Effect | 1. Maintain mineral wool performance: insulation performance (thermal conductivity) / non-combustibility / constructability (cutting) 2. Improve surface hardness: not install galvanized sheets 3. Reduce material costs and installation costs: not use galvanized sheets 4. Upgrade surface appearance quality 5. Improve workability: easy installation of a pin and cutting |
||
| Application |  |
||
This product is for parts with a risk of damage to A-CLASS thermal insulation.
It does not need outer protection using galvanized iron and has affordability and good quality (surface hardness and resilience).
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Passage way (Height Below 2300mm, A-60) except Vent Trunk (PCTC, A-30/A-60), and Elevator Trunk | Density | 150kg/㎥ (40mm, 60mm) |
| Reference | IMO Res. MSC. 307(88):2010 / ANNEX 1 Part 3 : A Class Division, Part 5 : Surface Flammability | Fitting | YS-HARDNESS |
| Effect | 1. Maintain mineral wool performance: insulation performance (thermal conductivity) / non-combustibility / constructability (cutting) 2. Improve surface hardness: not install galvanized sheets 3. Reduce material costs and installation costs: not use galvanized sheets 4. Upgrade surface appearance quality 5. Improve workability: easy installation of a pin and cutting |
||
| Application |  |
||
This is alternative of containment systems for Conventional heating and hot piping
that it has Superior insulation, workability, precision, and flexibility.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Engine Room (Exh. Gas Pipe) | Density | 150kg/㎥ (50mm, 75mm) |
| Standard | IMO Res. MSC. 307(88):2010 / ANNEX 1 Part 1 : Non-combustibility | Fitting | YS-HARDNESS |
| Effect | 1. Maintain mineral wool performance: thermal insulation (thermal conductivity) / non-combustibility / constructability (cutting) 2. Improve surface hardness: not install galvanized sheets 3. Reduce material costs and installation costs: not use galvanized sheets 4. Upgrade surface appearance quality 5. Have a better thermal efficiency than the LAMELLA MAT TYPE |
||
| Application |     |
||
This is alternative of containment systems for Conventional heating and hot piping
that it has Superior insulation, workability, precision, and flexibility.
| Division | Descriptio | Division | Descriptio |
|---|---|---|---|
| Purpose | Engine Room (Exh. Gas Pipe) | Density | 150kg/㎥ (50mm, 75mm) |
| Standard | IMO Res. MSC. 307(88):2010 / ANNEX 1 Part 1 : Non-combustibility | Fitting | YS-HARDNESS |
| Effect | 1. Maintain mineral wool performance: thermal insulation (thermal conductivity) / non-combustibility / constructability (cutting) 2. Improve surface hardness: not install galvanized sheets 3. Reduce material costs and installation costs: not use galvanized sheets 4. Upgrade surface appearance quality 5. Have a better thermal efficiency than the LAMELLA MAT TYPE |
||
| Application |  |
||
|
|||
 |
|||
 |
|||
This product was self-developed to secure insulation performance of A-CLASS hull structure stiffeners and has been applied to domestic vessels since 1993.
It improved problems arising from “on-site side fabrication (separate type)” in installing the existing stiffener through
“folding fabrication (integral type).” It carries high workability and constructability.
| Division | Description | ||
|---|---|---|---|
| Product | TYPE-1 | TYPE-2 | TYPE-3 |
 |  |  |
|
| Thickness and surface materials are decided by a customer’s request. | |||
| Purpose | A-30 / A-60 Class (Insulation material for ship stiffeners) |
||
| Density | 100kg/㎥(35T), 110kg/㎥(25T, 75T), 120kg/㎥ 50T), 150kg/㎥(40T) | ||
| Standard | IMO Res. MSC. 307(88):2010 / ANNEX 1 Part 1 : Non-combustibility, Part 3 : A Class Division, Part 5 : Non-combustibility |
||
| Component | Mineral Wool, Glass Cloth, YS-HARDNESS, Al-Foil, PET Film | ||
| Shop drawing | Flat plate (existing product) | Mold product | |
 |  |
||
| Effect | 1) Improve workability and constructability 2) Maximize production efficiency 3) Shorten the work period 4) Minimize the scrap ratio against field patterning |
||
This product was self-developed to secure insulation performance of A-CLASS hull structure stiffeners and has been applied to domestic vessels since 1993.
It improved problems arising from “on-site side fabrication (separate type)” in installing the existing stiffener through
“folding fabrication (integral type).” It carries high workability and constructability.
| Division | Description | |
|---|---|---|
| Product | TYPE-1 |  |
| TYPE-2 |  |
|
| TYPE-3 |  |
|
| Thickness and surface materials are decided by a customer’s request. | ||
| Purpose | A-30 / A-60 Class (Insulation material for ship stiffeners) |
|
| Density | 100kg/㎥(35T), 110kg/㎥(25T, 75T), 120kg/㎥ 50T), 150kg/㎥(40T) | |
| Standard | IMO Res. MSC. 307(88):2010 / ANNEX 1 Part 1 : Non-combustibility, Part 3 : A Class Division, Part 5 : Non-combustibility |
|
| Component | Mineral Wool, Glass Cloth, YS-HARDNESS, Al-Foil, PET Film | |
| Shop drawing | ||
| Flat plate (existing product) |  |
|
| Mold product |  |
|
| Effect | 1) Improve workability and constructability 2) Maximize production efficiency 3) Shorten the work period 4) Minimize the scrap ratio against field patterning |
|
This product is applied to the cooling material of an LNG ship cargo container.
It has outstanding thermal insulation performance as evidenced with its French “GTT certification.
| NO. 96 | ||
|---|---|---|
| Product | Glass Wool |   |
| Flexible Insulation (F Type) |  |
|
| Flexible Insulation (M Type) |  |
|
| Purpose | LNG Ship Insulation | |
| Density | 22kg/㎥, 35kg/㎥, 40kg/㎥ | |
| Standard | 1. Glass Wool : M3016 2. Glass Wool for Insulating BOX : M3026 |
|
| Component | Glass Wool, Flexible Insulation(F &M Type), Rigid Insulation(PVC Form), Kraft Paper |
|
| Mark Ⅲ | ||
|---|---|---|
| Product | Glass Wool |   |
| Fiber Glass Cloth |  |
|
| Purpose | LNG Ship Insulation | |
| Density | 22kg/㎥, 35kg/㎥ | |
| Standard | 1. Glass Wool : M3016 2. Glass Cloth : M3017 |
|
| Component | Glass Wool, Glass Cloth | |
This product is applied to the cooling material of an LNG ship cargo container.
It has outstanding thermal insulation performance as evidenced with its French “GTT certification.
| No 96. | |
|---|---|
| Product | |
| Glass Wool | |
|
|
| Flexible Insulation (F Type) |
|
|
|
| Flexible Insulation (M Type) |
|
|
|
| Purpose | LNG Ship Insulation |
| Density | 22kg/㎥, 35kg/㎥, 40kg/㎥ |
| Standard | 1. Glass Wool : M3016 2. Glass Wool for Insulating BOX : M3026 |
| Component | Glass Wool, Flexible Insulation(F &M Type), Rigid Insulation(PVC Form), Kraft Paper |
| Mark Ⅲ | |
|---|---|
| Product | |
| Glass Wool | |
|
|
| Fiber Glass Cloth | |
|
|
| Purpose | LNG Ship Insulation |
| Density | 22kg/㎥, 35kg/㎥ |
| Standard | 1. Glass Wool : M3016 2. Glass Cloth : M3017 |
| Component | Glass Wool, Glass Cloth |
This product is applied to A-CLASS vessels. It shows remarkable workability
and constructability thanks to its overlapped edges.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | interior materials, insulation materials, buildings, ducts, dryers | Reference | KS L 9102, JIS A 9504, ASTM C 612 |
| Available temperature | 600℃ | Standard | 25mm, 50mm, 75mm, 100mm, 0.5×1 |
| Density | 80kg/㎥, 100kg/㎥, 110kg/㎥, 120kg/㎥, 140kg/㎥, 150kg/㎥ | Fitting | GLASS CLOTH, WIRE NET, ALUMINUM |
This product is applied to A-CLASS vessels. It shows remarkable workability
and constructability thanks to its overlapped edges.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | interior materials, insulation materials, buildings, ducts, dryers | Reference | KS L 9102, JIS A 9504, ASTM C 612 |
| Available temperature | 600℃ | Standard | 25mm, 50mm, 75mm, 100mm, 0.5×1 |
| Density | 80kg/㎥, 100kg/㎥, 110kg/㎥, 120kg/㎥, 140kg/㎥, 150kg/㎥ | Fitting | GLASS CLOTH, WIRE NET, ALUMINUM |
This roll-shaped product has fine thermal insulation and sound absorption functions.
It is free and easy to be installed on a surface with complex shape.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Thermal insulation of ducts and pipes | Reference | KS L 9102, JIS A 9504, ASTM C 592 |
| Available temperature | 600℃ | Standard | 25mm, 50mm, 75mm, 0.5×5 |
| Density | 80kg/㎥ ~ 120kg/㎥ | Fitting | GLASS CLOTH, ALUMINUM |
This roll-shaped product has fine thermal insulation and sound absorption functions.
It is free and easy to be installed on a surface with complex shape.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Thermal insulation of ducts and pipes | Reference | KS L 9102, JIS A 9504, ASTM C 592 |
| Available temperature | 600℃ | Standard | 25mm, 50mm, 75mm, 0.5×5 |
| Density | 80kg/㎥ ~ 120kg/㎥ | Fitting | GLASS CLOTH, ALUMINUM |
As this product has high insulation performance and is easy to install,
it is suitable for thermal insulation of pipes and piping equipment.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Thermal insulation of pipes | Reference | KS L 9102, JIS A 9504, ASTM C 547 |
| Available temperature | 600℃ | Standard | 1/8”~10” by size/25, 30, 40, 50mm in thickness |
| Density | Less than 150 kg/㎥ | Fitting | GLASS CLOTH, ALUMINUM |
As this product has high insulation performance and is easy to install,
it is suitable for thermal insulation of pipes and piping equipment.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Thermal insulation of pipes | Reference | KS L 9102, JIS A 9504, ASTM C 547 |
| Available temperature | 600℃ | Standard | 1/8”~10” by size/25, 30, 40, 50mm in thickness |
| Density | Less than 150 kg/㎥ | Fitting | GLASS CLOTH, ALUMINUM |
This product of vertical fiber arrangement has an outstanding compressive strength
and is suitable for thermal insulation of big structures considering its fine workability.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Pipes larger than 10”, ducts and tanks | Reference | KS L 9102, JIS A 9504, ASTM C 547 |
| Available temperature | 600℃ | Standard | 1m × 1m, 1m × 2m |
| Density | 80kg/㎥ ~ 140kg/㎥ | Fitting | GLASS CLOTH, tinfoil |
This product of vertical fiber arrangement has an outstanding compressive strength
and is suitable for thermal insulation of big structures considering its fine workability.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Pipes larger than 10”, ducts and tanks | Reference | KS L 9102, JIS A 9504, ASTM C 547 |
| Available temperature | 600℃ | Standard | 1m × 1m, 1m × 2m |
| Density | 80kg/㎥ ~ 140kg/㎥ | Fitting | GLASS CLOTH, tinfoil |
This product is applied to thermal insulation of piping sections.
It boasts superb dimensional precision and workability by mold-based manufacture.
| Division | Round Board | Elbow & Bending | |
|---|---|---|---|
| Product |  |  |
|
| Purpose | Insulation of pipes up to 200A | For Elbow part / For Bending part | |
| Density | 110kg/㎥ | 110kg/㎥ | |
| Production standard | 200A~600A/50T, 75T 700A~2,700A/100T | Elbow | 20A~600A/30T,50T,75T |
| Bend | 15A~200A/30T, 50T | ||
| Standard | IMO Res. MSC. 307(88):2010 / ANNEX 1 Part 1 : Non-combustibility | ||
| Component | Mineral Wool, Glass Cloth, Al-Foil | Mineral Wool | |
This product is applied to thermal insulation of piping sections.
It boasts superb dimensional precision and workability by mold-based manufacture.
| Division | ||
|---|---|---|
| Round Board | ||
|
||
| Purpose | Insulation of pipes up to 200A | |
| Density | 110kg/㎥ | |
| Production standard | 200A~600A/50T, 75T 700A~2,700A/100T |
|
| Standard | IMO Res. MSC. 307(88):2010 / ANNEX 1 Part 1 : Non-combustibility | |
| Component | Mineral Wool, Glass Cloth, Al-Foil | |
| Elbow & Bending | ||
|
||
| Purpose | For Elbow part / For Bending part | |
| Density | 110kg/㎥ | |
| Production standard | Elbow | 20A~600A/30T,50T,75T |
| Bend | 15A~200A/30T, 50T | |
| Standard | IMO Res. MSC. 307(88):2010 / ANNEX 1 Part 1 : Non-combustibility | |
| Component | Mineral Wool | |
This board-shaped product has high strength and durability and
excellent thermal insulation and sound absorption functions.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Thermal insulation/sound-proofing materials (vessels, vehicles, sound-proofing walls, ducts), partition walls and external walls of buildings | Reference | KS L 9102, JIS A 9504, ASTM C 665 |
| Available temperature | 300℃ | Standard | 1m × 1m(25mm, 50mm) 1m × 2m(25mm, 50mm) |
| Density | 22kg/㎥ ~ 48kg/㎥ | Fitting | GLASS CLOTH, tinfoil, ALUMINUM |
This board-shaped product has high strength and durability and
excellent thermal insulation and sound absorption functions.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | Thermal insulation/sound-proofing materials (vessels, vehicles, sound-proofing walls, ducts), partition walls and external walls of buildings | Reference | KS L 9102, JIS A 9504, ASTM C 665 |
| Available temperature | 300℃ | Standard | 1m × 1m(25mm, 50mm) 1m × 2m(25mm, 50mm) |
| Density | 22kg/㎥ ~ 48kg/㎥ | Fitting | GLASS CLOTH, tinfoil, ALUMINUM |
As this product has high insulation performance and is easy to install,
it is suitable for thermal insulation of pipes and piping equipment.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | PIPE insulation | Reference | KS L 9102, JIS A 9504, ASTM C 547 |
| Available temperature | 300℃ | Standard | 1/8” ~ 8” × 25m/m, 8”× 40m/m |
| Density | 60kg/㎥ | Fitting | GLASS CLOTH, tinfoil, ALUMINUM |
As this product has high insulation performance and is easy to install,
it is suitable for thermal insulation of pipes and piping equipment.
| Division | Description | Division | Description |
|---|---|---|---|
| Purpose | PIPE insulation | Reference | KS L 9102, JIS A 9504, ASTM C 547 |
| Available temperature | 300℃ | Standard | 1/8” ~ 8” × 25m/m, 8”× 40m/m |
| Density | 60kg/㎥ | Fitting | GLASS CLOTH, tinfoil, ALUMINUM |
This product is used for thermal insulation of the flanges
and valves of vessels and pipe lines.
| Division | Description | |
|---|---|---|
| Product |  |
|
| Purpose | Ship & Various Piping LINES Upper Flange & Valve’s Air-condition Works | |
| Density | 80kg/㎥ | |
| Standard | JIS, DIN, ANSI | |
| Component | Mineral Wool + Al-Foil | Mineral Wool + Glass Cloth |
This product is used for thermal insulation of the flanges
and valves of vessels and pipe lines.
| Division | Description |
|---|---|
| Product |  |
| Purpose | Ship & Various Piping LINES Upper Flange & Valve’s Air-condition Works |
| Density | 80kg/㎥ |
| Standard | JIS, DIN, ANSI |
| Standard | Fiber Mineral Wool + Al-Foil |
| #rowsapn# | Fiber Mineral Wool + Fiber Glass Cloth |
| Division | Description | Width | Length |
|---|---|---|---|
| Tape | Aluminum Tape | 50mm, 75mm, 100mm | 50m |
| Glass Cloth with AL-Foil Tape | |||
| Glass Cloth Tape |
| Division | Description | Width | Length |
|---|---|---|---|
| Tape | Aluminum Tape | 50mm, 75mm, 100mm | 50m |
| Glass Cloth with AL-Foil Tape | |||
| Glass Cloth Tape |
This product is used for fixing installation parts for thermal insulation of ships.
| Division | Description |
|---|---|
| Product | insulating material Fixation |
| Purpose | Fix thermal insulation materials |
| Standard | 30mm, 55mm, 80mm, 105mm (Other sizes are available at the customer’s request.) |
This product is used for fixing installation parts for thermal insulation of ships.
| Division | Description |
|---|---|
| Product | insulating material Fixation |
| Purpose | Fix thermal insulation materials |
| Standard | 30mm, 55mm, 80mm, 105mm (Other sizes are available at the customer’s request.) |